HJ-Y2 Light Jade Frosted White EVA Interlayer

HJ-Y2 Light Jade Frosted White EVA Interlayer for Decorative Laminated Glass

HJ-Y2 is a light jade-white frosted EVA interlayer designed for decorative laminated glass where privacy, soft light diffusion and a clean white appearance are required.

Unlike clear EVA interlayers, HJ-Y2 changes the visual character of the finished glass by creating a soft translucent layer between two glass panes. It is particularly suitable for partitions, doors, shower glass, hospitality interiors and other decorative glazing where completely transparent glass would provide insufficient privacy.

Key Highlights

• Light jade-white frosted appearance

• Soft translucency with visual privacy

• Designed for decorative laminated glass

• Suitable for a wide range of interior glass designs

• Available in different roll specifications

• Sample and technical selection support

What Is HJ-Y2 Light Jade Frosted White EVA Interlayer?

HJ-Y2 is part of E&N HONJIA's decorative white EVA interlayer range.

During laminated-glass processing, the EVA film is positioned between two sheets of glass and processed under controlled vacuum and heating conditions. After lamination, the frosted white layer remains protected inside the glass construction rather than being applied only to the exposed glass surface.

The main purpose of HJ-Y2 is visual rather than simply optical clarity. Its lighter jade-white appearance gives laminated glass a softer and more translucent look than ordinary clear glass while reducing direct visibility through the panel.

This makes it useful for projects where designers want to maintain incoming light while creating a degree of privacy and a more refined decorative finish.

The final appearance can vary depending on the glass type, glass thickness, number of interlayer layers and surrounding lighting. For projects where the exact white tone or privacy level is important, we recommend evaluating a laminated sample before confirming full production.

Typical Laminated Glass Structure with HJ-Y2

Glass Layers

The two outer glass sheets form the main surfaces of the laminated glass. Glass type, thickness, size and surface treatment should be selected according to the finished-glass application.

HJ-Y2 EVA Interlayer

HJ-Y2 is positioned between the glass layers before lamination. During processing, the EVA interlayer bonds the glass together while creating the light jade-white frosted appearance visible in the finished panel.

Finished Laminated Glass

After correct processing, the white decorative effect becomes part of the laminated construction. This allows designers and glass processors to create privacy and decorative glass without relying only on surface-applied films or surface frosting.

HJ-Y2 Product Specifications

Note: Exact thickness, width, roll length and technical performance data should be confirmed against the latest HJ-Y2 specification before ordering.

Why Choose Light Jade Frosted White EVA?

Soft Frosted Appearance

HJ-Y2 produces a light jade-white appearance rather than the completely transparent effect of clear EVA.

The result is suitable for projects where clear glass looks too open but fully opaque glass would block too much visual lightness.

Privacy with Light Diffusion

The translucent interlayer reduces direct visibility through the glass while still allowing light to pass through the panel.

This can help designers divide spaces without creating the heavy visual effect of a solid wall.

Decorative Effect Inside the Laminate

The appearance is created by the interlayer positioned inside the laminated-glass structure.

This gives glass processors another way to create decorative glass using the same basic Glass / EVA / Glass construction used in EVA lamination.

Suitable for Different Design Styles

The neutral white tone works well with modern offices, residential interiors, hospitality projects and commercial spaces where designers want a clean and understated glass finish.

Laminated-Glass Processing

HJ-Y2 is supplied as an EVA interlayer for glass lamination and can be processed with suitable vacuum laminating equipment.

The actual processing cycle should be adjusted according to glass thickness, film build-up, equipment performance and production conditions.

Applications of HJ-Y2 Frosted White EVA Laminated Glass

Office Partitions

HJ-Y2 can be used in meeting rooms, management offices and internal glass partitions where completely clear glass does not provide enough privacy.

The light frosted appearance helps separate working areas while retaining a bright and open interior.

Shower Enclosures and Bathroom Glass

For bathroom partitions and shower glass, the soft white translucent appearance provides visual privacy without requiring a fully opaque panel.

The laminated construction also allows the decorative layer to remain enclosed between the glass sheets.

Residential Doors and Room Dividers

HJ-Y2 is suitable for sliding doors, internal partitions, entrance panels and other decorative residential glazing.

It works particularly well where homeowners want more privacy than clear glass but still want natural light to move between rooms.

Hotels and Hospitality Interiors

Hotel bathrooms, spa areas, lobby partitions and decorative screens can use light frosted laminated glass to create visual separation without making the space feel closed.

Retail and Commercial Interiors

HJ-Y2 can be used for shop partitions, decorative panels, reception areas and branded interior glass where a neutral frosted background is preferred.

Decorative Exterior Glazing

HJ-Y2 may also be considered for suitable exterior decorative laminated-glass applications.

For exterior projects, the complete glass build-up, panel size, edge condition, environmental exposure and required finished-glass performance should be reviewed before material selection.

HJ-Y2 vs Other White EVA Interlayers

The main reason for choosing between white EVA grades is usually the finished appearance and required level of transparency or privacy, rather than choosing simply by product name.

HJ-Y2 – Light Jade Frosted White

Choose HJ-Y2 when the project needs a lighter, softer and more translucent frosted-white appearance.

Typical use:
Office partitions, residential dividers, bathrooms, hospitality interiors and decorative panels.

HJ-Y – Jade White

HJ-Y provides a more pronounced jade-white appearance and can be considered when the project requires a stronger white visual effect.

Opaque or Stronger Frosted White Grades

For applications requiring much stronger coverage, lower visual transparency or a different frosted texture, E&N HONJIA also offers other white, opaque and frosted EVA options.

Because the final effect can change after lamination, we recommend comparing physical laminated samples when colour tone or privacy level is critical to the project.

Available Specifications and Customization

HJ-Y2 can be supplied in roll form for laminated-glass processing.

Available specifications may include different:

Thicknesses
Widths
Roll lengths
Cutting requirements
Packaging requirements

For customized production, please provide the required glass size, EVA thickness, roll width, quantity and intended application so that the appropriate specification can be confirmed before production.

Processing HJ-Y2 EVA Interlayer

1. Prepare the Glass

Glass surfaces should be clean and dry before lamination. Dust, oil, moisture or other contamination between the layers may affect the appearance of the finished glass.

2. Position the EVA Interlayer

Cut HJ-Y2 according to the required glass size and position it evenly between the glass sheets.

Avoid contamination or excessive handling of the interlayer during assembly.

3. Vacuum and De-air

The assembled glass should be properly vacuumed to remove trapped air before and during heating according to the laminating equipment and process being used.

4. Lamination

Heat the assembly using the validated processing cycle for the selected glass thickness and EVA build-up.

Do not assume that one temperature and time setting is suitable for every glass construction.

5. Cooling and Inspection

Allow the laminated glass to cool under appropriate conditions before inspection.

Check the finished panel for appearance, colour consistency, bubbles, edge condition and other project-specific acceptance requirements.

Processing Note: Actual lamination settings depend on equipment, glass thickness, number of EVA layers, panel dimensions and production conditions. Trial lamination is recommended when introducing a new glass build-up.

Quality Control for Decorative White EVA

For a decorative EVA product such as HJ-Y2, quality control should focus not only on bonding but also on the appearance of the finished laminated glass.

Typical inspection points include:

Film Appearance
Check the film for visible contamination, surface defects and colour irregularities before lamination.

Thickness and Dimensions
Confirm that the supplied film matches the required production specification.

Colour and Frosted Effect
The finished glass should be evaluated under representative lighting because white tone and translucency can appear different under daylight and artificial light.

Lamination Quality
Finished test panels should be inspected for bubbles, local defects and edge appearance.

Application Validation
Where the finished glass has specific durability, safety or environmental requirements, the complete laminated-glass construction should be validated for the intended application rather than relying on the interlayer specification alone.

Why Work with E&N HONJIA for Decorative EVA Interlayers?

E&N HONJIA supplies not only clear EVA interlayers but also a range of decorative white, frosted, opaque and coloured EVA films for different laminated-glass designs.

This allows glass processors to compare different visual effects and select a film according to the required transparency, privacy and finished-glass appearance.

For new projects, we can assist with product selection based on:

Required glass appearance
Glass build-up
Panel dimensions
Indoor or outdoor use
Processing equipment
Required EVA specification
Sample testing requirements

Samples can be used to evaluate colour, translucency and lamination results before larger production quantities are confirmed.

Frequently Asked Questions

What is the main difference between HJ-Y2 and clear EVA film?

Clear EVA is selected when high visual transparency is required. HJ-Y2 is a decorative white EVA designed to create a light frosted and translucent appearance in laminated glass.

Is HJ-Y2 completely opaque?

No. HJ-Y2 is intended to create a frosted translucent effect rather than a completely opaque white panel.

The exact visual result depends on the glass construction and lighting conditions, so a laminated sample is recommended when the required privacy level is critical.

What is the difference between HJ-Y2 and HJ-Y?

HJ-Y2 provides a lighter jade-white frosted appearance, while HJ-Y creates a stronger jade-white visual effect.

The best choice depends on how much translucency and visual privacy the finished glass requires.

Can HJ-Y2 be used for office partitions?

Yes. Office partitions, meeting rooms and internal privacy screens are typical decorative applications for this type of light frosted EVA laminated glass.

Can HJ-Y2 be used for shower glass?

HJ-Y2 can be considered for laminated shower partitions and bathroom privacy glass where a soft translucent appearance is required.

The complete glass construction and installation requirements should still be selected for the intended application.

Can HJ-Y2 be used outdoors?

HJ-Y2 can be considered for suitable decorative exterior laminated-glass applications, but exterior suitability should be evaluated together with the glass build-up, panel size, edge condition, environmental exposure and required performance.

Can white EVA be combined with other decorative materials?

Some decorative glass constructions may combine EVA with coloured layers, fabrics, wire mesh or other inserts.

Because different materials and EVA grades can behave differently during heating, a representative sample test should be completed before mass production.

How do I choose the correct thickness?

The required EVA thickness depends on the glass build-up, glass thickness, panel size, processing method and finished-glass requirements.

Send us the glass structure and application, and we can help review the suitable specification.

Can I request a sample before ordering?

Yes. Samples are available for glass processors and project evaluation.

For decorative EVA, producing a laminated sample is particularly useful because it allows the customer to evaluate the actual colour, translucency and privacy effect after processing.

Related EVA and Decorative Glass Solutions

Jade White EVA Interlayer
For laminated glass requiring a stronger jade-white appearance.

Super White Opaque EVA Interlayer
For applications requiring much stronger visual coverage.

Sandblasted / Frosted White EVA Interlayer
For a different frosted decorative finish.

Clear EVA Interlayers
For laminated glass where transparency rather than privacy is the main requirement.

Decorative Laminated Glass
Explore finished-glass solutions using EVA interlayers, colours and decorative inserts.

Need Help Choosing the Right White EVA Interlayer?

Choosing a decorative EVA film is easier when the required finished-glass appearance is defined first.

Send E&N HONJIA your:

Glass size and build-up
Required white or frosted effect
Indoor or outdoor application
Required EVA thickness
Quantity
Laminating equipment or process information

We can help compare suitable EVA options, prepare samples and confirm the specification for your project.

Request a Quote | Request a Sample | Contact E&N HONJIA